Paragon F130 Kiln 120volt Drop Ship item

Paragon F130 Kiln - 120 Volt

Paragon F-130 Elite Lamp Working Kiln You can make figurines up to 12” tall in the F-130 Elite. Anneal large glass beads and marbles. Raise the spring-loaded vertical-drop door to insert a glass figurine with a punty rod. Lower the door. The punty rod will extend outside the firing chamber through the smaller punty rod door. This allows even large glass pieces to anneal safely. Enjoy the glittering beauty of dichroic glass. This kiln will give you a haven of creative enjoyment that will immerse you for many years. Imagine how it could change your life style. A deluxe mercury relay is standard We have upgraded the F-130 with the deluxe mercury relay, which controls the cycling of the heating elements. The relay is industrial grade and heavy-duty for extra long life. Glass artists cherish the dependability of the mercury relay.

New slide-out mandrel holder We have added an adjustable mandrel holder to the front of the kiln. Adjust it horizontally and vertically without tools. Position the heavy-duty welded mandrel holder from 4 1/2” to 13” in front of the main section of kiln floor. (Note: The firebrick extension on the front of the kiln extends 3” beyond the front edge of the kiln floor.) Then tighten the mandrel holder with the thumb screws on each side of the kiln. The holder slides inside steel tubes ingeniously mounted in the base of the kiln. The stainless steel mandrel rest, which includes 7 slots, can also be adjusted vertically. Convenient digital temperature controller Maintain the annealing temperature indefinitely with the Sentry Xpress 3-key controller. The controller is packed with features. It includes two firing modes: Single Speed and 8-segment Ramp-Hold. Single Speed mode is especially easy and quick to learn. The thermocouple, which senses the temperature, is protected with a high-nickel stainless steel sheath for long, trouble free life. Tested by TUV And for your safety, the F-130 is tested by TUV, Germany’s leading testing lab, to meet UL and CSA standards. The F-130 operates on 120 volts. If you prefer, you can order the F-130 in 240 volts. The kiln includes an on/off switch for your convenience.

Kiln Specifications:

• Max. Temperature: 1700F (926C)
• Voltage: 120
• Amps: 20
• Watts: 2400
• Nema:5-20R
• Chamber Volume: 0.90 CU.FT. (25.49 litres)
• Chamber Dims: 11"W x 11"D x 13"H (28W x 28D x 33H cm)
• Outer Dims: 22"W x 26"D x 28.75"H (56W x 66D x 73H cm)
• Shipping Size: 32"W x 34"D x 39"H (81W x 86D x 99H cm)
• Shipping Weight: 220.00 Lbs. (99.79 Kg.)
• Shipping Method: Truck