Paragon CS19D Kiln Drop Ship Item.

Paragon CS-19D Kiln

Paragon’s square CS-19D digital glass clamshell kiln is easy to load since the entire top section lifts out of the way. The CS-19D is dual-opening: You can open the kiln by lifting the kiln body and lid together or by lifting only the lid. The CS-19D heats from the top for even heat distribution across the glass surface. The lid elements are completely embedded in a deluxe, lightweight ceramic fiber lid. The lid has no grooves. This does away with element pins and helps eliminate dust inside the kiln. The kiln is easy to open because of three counter-weight springs mounted under the base. The kiln base extends 4” in the back to support the weight of the kiln when in the open position. The base comes with mar-proof rubber feet. The CS-19D has a two-year warranty. Digital Controller You will enjoy the convenience of digital firing. The reliable solid-state Sentry Xpress controller continually monitors the firing so you do not need to closely watch the kiln.

The reliable Sentry Xpress 3-key controller includes two modes: Single Speed and 8-segment Ramp-Hold. Control both heating and cooling with simple 3-key operation. Features of the Sentry Xpress 3-key Controller Program up to 8 segments (steps) in Ramp-Hold mode. Fire to a single temperature at a single speed in Single Speed mode. Store up to 4 programs in Ramp-Hold mode. Skip a segment in Ramp-Hold without having to stop the kiln to reprogram. (For instance, you want to skip to the annealing segment.) Change the target temperature in Ramp-Hold during firing without stopping the kiln to reprogram. Hold (soak) the temperature in both Single Speed and Ramp-Hold. Add Hold Time during firing without having to stop the firing to reprogram. Easily control both heating and cooling in Ramp-Hold. Program Review lets you check the program you are about to fire. Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Thermocouple Offset adjusts the thermocouple readout. Set the Delay to turn on the kiln at a time that best suits your busy schedule. Error Messages report mechanical problems. LED Lights show whether you are in program, review, or firing mode.

Kiln Specifications:

• Max. Temperature: 1700F (926C)
• Amps: 16
• Watts: 3840
• Nema: 6-20R
• Voltage: 240
• Hertz: 60
• Chamber Volume: 1.35 CU.FT. (38.23 litres)
• Chamber Dims: 19"L x 19"W x 6.5"D (48L x 48W x 17D cm)
• Outer Dims: 34"W x 33"D x 15.25"H (86W x 84D x 39H cm)
• Shipping Dims: 39"W x 35"D x 24"H (99W x 89D x 61H cm)
• Shipping Weight: 215 Lbs. (97.52 Kg.)