Paragon Bluebird XL Kiln CSA approved. Drop Ship Item.

Paragon Bluebird XL Kiln

The Paragon BlueBird XL is a dream kiln for the glass bead enthusiast. This 20” wide, 9” deep kiln safely anneals glass to prevent breakage during cooling. With your own Paragon annealing kiln, you will never again worry about glass breakage. The kiln opens doorways of opportunity in beadmaking. The 10” wide double doors give a total of 20” width for inserting bead rods. The BlueBird XL has a user-friendly 3-key Sentry Xpress digital controller. It maintains the annealing temperature that you program for the length of time desired. Features of the BlueBird XL 3-key digital Sentry Xpress controller 2 - 3.5” high doors with flexible high temperature gasket Rare-earth magnets hold the doors open or closed 8” deep firing chamber (measured with doors closed), 10" deep chamber (with doors open) Ceramic fiber firing chamber for rapid heating 2”-thick ceramic fiber doors with flexible gaskets Mandrel holders attach to kiln with magnets 1500°F maximum temperature Ceramic fiber roof with embedded elements Coated firebricks in roof Mar-proof plastic feet On-off safety switch Features of the Sentry Xpress 3-key Controller on Paragon Fusion Kilns Program up to 8 segments (steps) in Ramp-Hold mode. Fire to a single temperature at a single speed in Single Speed mode. Store up to 4 programs in Ramp-Hold mode. Skip a segment in Ramp-Hold without having to stop the kiln to reprogram. (For instance, you want to skip to the annealing segment.) Change the target temperature in Ramp-Hold during firing without stopping the kiln to reprogram. Hold (soak) the temperature in both Single Speed and Ramp-Hold. Add Hold Time during firing without having to stop the firing to reprogram. Easily control both heating and cooling in Ramp-Hold. Program Review lets you check the program you are about to fire. Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Program an alarm that will remind you to check on the kiln. Temperature display throughout firing and cooling in your choice of °F or °C Thermocouple Offset adjusts the thermocouple readout. Set the Delay to turn on the kiln at a time that best suits your busy schedule. Error Messages report mechanical problems. The sealed touch pad keeps out dust and is easy to wipe clean. LED Lights show whether you are in program, review, or firing mode. Colorful, illustrated instruction manual. 

Kiln Specifications:

• Max. Temperature: 1500F (815C)
• Amps: 14
• Watts: 1700
• Voltage: 120
• Nema: 5-15R
• Chamber Volume: .47 cu.ft. (13.31 litres)
• Chamber Dims: 20"W x 8"D x 4.5"H (51W x 20D x 11H cm)
• Shipping Dims: 31"W x 24"D x 22"H (79W x 61D x 56H cm)
• Shipping Weight: 90 Lbs. (40.82 Kg.)