Chemicals

	GLASSPRO CERIUM OXIDE #50620 - 1/2 lb. (227g) #50621 - 1.5 lbs. (680g) #50622 - 5 lbs. (2268g) A high grade optical posishing compound used to lessen and polish scratches from mirror bevels, table top edges, sculptured glass, etc. Cerium Oxide is mixed with water to form a paste or slurry. This compound has excellent suspension qualities and will not harden. Contains no zinc oxide, and meets most local disposal ordinances. May be used with Glass Polisher Cat. No. 27910.
	DIAMOND COOLANT Cat. No. 28827 8 oz. bottle. Increases the life of your grinder bits! High lubricity, water soluble solution. Easy to add to the water reservoir of your grinder, table saw or band saw. Increases bit life by reducing friction. Makes grinding and sawing faster and easier.
	EPOXY ADHESILVE XTR-311 Cat. No. 52601 - 1/4 lb. kit A high bond, water clear epoxy adhesive that has no rival in purity, ease of use and workability. XTR-311 is a two part epoxy mixed by weight 10:3. The cure time runs about 18 hours in room temperature and can be worked after 24 hours. Mainly used for flat glass lamination. XTR-311 does not yellow or amber over time with exposure to UV light. When mixed, the XTR-311 is extremely thin and easy to work with. It will double its thickness in about an hour and a half and exponentially from there. Unused portions can be frozen for short periods and re-used. 2 part kit.
	AMINO SILANE PRETREATMENT Cat. No. 52602 -1/2 liter A-1100 is the necessary amino-silane glass pre-treatment for HXTAL and XTR to ensure maximum bond strength. It prepares your glass surface for adhesion with HXTAL or XTR. A-1100 comes pre-mixed in a solution of high purity Isopropyl Alcohol and is ready to use out of the bottle. Simple wipe or spray the A-1100 onto the glass surface and dry wth hair-dryer or allow to air dry.